Configurable Response Using The Feature I/O; Configurable Functions Using The Feature I/O - Siemens SITRANS PCS 7 Function Manual

Configurable response using the Feature I/O

4.1

Configurable functions using the Feature I/O

Configurable functions using the Feature I/O
Some blocks have an input called Feature. This input can be used to influence the way in
which the block works.
The Feature Bits are assigned in the following order:
Bit number Meaning
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
0 Setting the startup characteristics (Page 50)
1 Reaction to the out of service mode (Page 54)
2 Resetting the commands for changing the mode (Page 55)
3 Enabling resetting of commands for the control settings
(Page 55)
4 Set switch or button mode (Page 56)
5 Control via auxiliary valve (Page 51)
6 Disabling opening and closing (Page 51)
7 Separate delay times for each alarm (Page 52)
8 Read configuration data automatically (Page 57)
Separate delay times for each alarm (Page 52)
9 AUTOHOTSPOT
10 Exiting local mode (Page 58)
11 Pause dosing at flow alarm (Page 59)
Activating the run time of feedback signals (Page 53)
17 Activating bumpless changeover to automatic mode
(Page 59)
22 Update acknowledgment and error status of the message call
(Page 60)
24 Enabling local operating permission (Page 60)
25 AUTOHOTSPOT
28 Disabling operating points (Page 61)
4
Block
Mag6T, Lut400,
SipPS2, SitransT, Si‐
transP, SitrP_PA,
SitrFC43, SitrLRPA,
SitrLRHA, Mr200
Mag6T, Lut400,
SipPS2, SitransT, Si‐
transP, SitrP_PA,
SitrFC43, SitrLRPA,
SitrLRHA, Mr200
Mag6T, SipPS2
Mag6T, SipPS2,
SitrP_PA
Mag6T, SipPS2,
SitrP_PA, SitrFC43
SipPS2
SipPS2
Mag6T
Mag6T
SipPS2
Mag6T, SipPS2
Mag6T, SipPS2
Mag6T
SipPS2
Mag6T
Mag6T, Lut400,
SipPS2, SitransT, Si‐
transP, SitrP_PA,
SitrFC43, SitrLRPA,
SitrLRHA, Mr200
Mag6T, SipPS2
Mag6T, SipPS2
Mag6T, Lut400, SipPS2
49