Siemens SIMATIC PCS 7 Operating Manual page 131

5. The configuration web page opens as shown in the image below, do the required
configuration and click the "Result" tab to see the configuration details.
6. Click on the "Write back to COMOS" button, the web page closes and returns back to the
HW configuration tool window.
The configuration is saved.
7. Select all other required components from the "Additional items" area.
8. Click on the "Create" button.
Note
If the "Create" button is pressed a second time a new station is created.
Plant Automation Accelerator 3.0
Operating Manual, 04/2019, A5E46351208-AA
14.9 Hardware engineering with the configuration tool
Engineering in PAA
131