Import from PCS 7 to PAA
18.4 Managing PCS 7 libraries in COMOS
The following devices are supported:
● PROFINET
● PROFIBUS PA
● GSD / GSDML data exchange
● Intelligent field devices PA/DP (Micromaster, SINAMICS (DriveES), Simocode)
18.3
Attributes of CM
The data transfer now also takes into consideration the "Version" attribute of CM.
18.4
Managing PCS 7 libraries in COMOS
Several libraries can now be imported into PAA.
1. Import of a PCS 7 library to a specific location in COMOS
2. Import of further libraries
3. Specification of the master library (is used during data exchange)
All the libraries are then stored in COMOS at the specific location but structured hierarchically.
By default, the name of the library in PAA is the PCS 7 project name.
Editing libraries in the type configurator
You can carry out the following actions in the type configurator:
"Library" column
● Creation of CMT, enumerations and functions
● Updating the elements
● Moving and changing the elements
"Structure" column
● Customizing the structure with drag&drop
● Creation of variants of CMT
176
Plant Automation Accelerator 3.0
Operating Manual, 04/2019, A5E46351208-AA