Siemens SIMATIC PCS 7 Operating Manual page 163

3. Click the "Open mapping table" button.
4. Edit the mapping table according to these instructions:
Reference to the mapping table (Page 202)
Saving the mapping table
To save the assignments to the control module type, follow these steps:
1. Open the fully assigned mapping table of a control module.
2. To save the assignments at the template of the control module type used, click on the "Insert
in template" button in the toolbar at the top.
3. Confirm your entries.
If you want to check the assignments in the template, open the mapping table of the control
module type in the following folder:
"@Template Templates > @PCS 7 > Library folder"
Plant Automation Accelerator 3.0
Operating Manual, 04/2019, A5E46351208-AA
Linking attributes from PAA and PCS 7
16.4 Adopting a mapping table as a template
163