17.13
Exporting ET 200iSP modules from PAA to PCS 7
Note
Following configurations can be exported
● ET 200iSP with single PROFIBUS interface module and 1 PS
● ET 200iSP with redundant PROFIBUS interface module and 2 PS
Procedure
1. In the menu bar, select the "Plugins > Automation > PCS 7 interface > Import / Export
PCS 7" command.
2. Select the "Export" tab.
See also chapter Exporting a PAA project (Page 167).
Note
It is not necessary to create bus and terminal modules to transfer a project with ET 200iSP from
PAA to PCS 7.
Plant Automation Accelerator 3.0
Operating Manual, 04/2019, A5E46351208-AA
17.13 Exporting ET 200iSP modules from PAA to PCS 7
Export from PAA to PCS 7
173