Siemens SIMATIC PCS 7 Operating Manual page 73

9. Select the library file.
The library file is required only when you want to use the "Signal" and "Parameter" mapping
classes.
Note
The user can use the example Library file in the path "C:\ProgramData\Siemens\PCS 7
Plant Automation Accelerator\Vx.y\Excel" after installation.
Note
When the user selects any invalid library file, an error dialog will pop-up, Signal/Parameter
will be empty, but the data is still populated for TH, CM and HW.
10.The "Column mapping" area is enabled and you can make the required mappings for
different properties of mapping classes in the "Column mapping" tree structure.
Note
● Under each mapping label, there are some mandatory properties indicated by "*" to be
Plant Automation Accelerator 3.0
Operating Manual, 04/2019, A5E46351208-AA
mapped or you get the error in red as shown in the example image below and the "Import"
button is disabled. The bold font indicates that the mappings are correct. The red font
indicates that the mappings are done only for the non-mandatory properties and not for
the mandatory properties under Mapping label.
Excel import plugin
13.1 Objective of Excel import
73