Importing Compact Field Unit With Pa Slaves From Pcs 7 To Paa; Importing Et 200Sp Ha From Pcs 7 - Siemens SIMATIC PCS 7 Operating Manual

9. Click on the "Import" button.
The "Data transfer - Generate/import" dialog opens. See also chapter Information in the
Data transfer - Generate/import dialog (Page 195).
Note
No full synchronization in Automation Interface
PC stations and other devices that cannot be configured using the hardware configuration
are not currently synchronized via the Automation Interface. Make sure that these devices
are not selected in the "Data transfer – Generate/import" dialog. If, in exceptional cases,
error messages also appear for other devices, please contact Support.
10.Click on the "Import objects from B to A" button.
Result
The hardware is imported to the current PAA project.
If you have activated the "Extended parameters" option, when importing the hardware options
in PAA, the tab "Attributes > Extended automation" will be created. The extended hardware
parameters will be stored in this tab.
18.12

Importing Compact Field Unit with PA slaves from PCS 7 to PAA

Requirements
Compact Field Unit (CFU) with PA slaves is created in PCS 7 project.
Procedure
1. In the menu bar, select the "Plugins > Automation > PCS 7 interface > Import / Export
PCS 7" command.
2. Select the "Import" tab.
See also chapters Importing the hardware configuration (Page 182) and Creating the
Compact Field Unit (CFU) (Page 111).
Result
The CFU with PA slaves is imported to the current PAA project.
18.13

Importing ET 200SP HA from PCS 7

Requirements
The PCS 7 project with ET 200SP HA is created.
Plant Automation Accelerator 3.0
Operating Manual, 04/2019, A5E46351208-AA
Import from PCS 7 to PAA
18.13 Importing ET 200SP HA from PCS 7
183