Example For Interlock Logic On Function Diagrams - Siemens SIMATIC PCS 7 Operating Manual

Engineering in PAA
14.15 Engineering in the function diagram
14.15.5

Example for interlock logic on function diagrams

Requirements
● An interlock logic has been created in function diagrams.
See section Editing the logic on function diagrams (Page 149).
Example
The below example shows how the blocks are interconnected. Drag&drop a parameter of the
function from the Navigator tree to the function diagram and connect directly to the CM.
As you can see in the example below, the parameter of the function is connected to the CM
(MonAn) on the right side and below, the function is connected to the parameter of "MonAn" on
another function diagram of other CM (MonAn#DeltaCalc).
150
Plant Automation Accelerator 3.0
Operating Manual, 04/2019, A5E46351208-AA