Siemens SIMATIC PCS 7 Operating Manual page 51

● Instance of EMT created (in PAA)
– EMT template needs to be created first
– Execute the engineering task to get an EM instance
● Assigned another CM instance at the assignment in the EM instance
Note
It is only possible to assign instances of compatible CM type in the project.
Procedure
1. Export using the "Import / Export PCS 7" plugin.
Verify in PCS 7 in EM instance that the assigned control module is the CM instance.
Plant Automation Accelerator 3.0
Operating Manual, 04/2019, A5E46351208-AA
See also chapter Editing software engineering using engineering tasks (Page 136).
Management of equipment module types
8.11 Exchanging control module assignments
51