Importing Em/Emt From Pcs 7 Without Sequence Chain - Siemens SIMATIC PCS 7 Operating Manual

5. Click on the "Import" button.
The "Data transfer - Generate/import" dialog opens. See also chapter Information in the
Data transfer - Generate/import dialog (Page 195).
6. Click on the "Import objects from B to A" button.
Note
Import of signal attributes high scale value, low scale value, unit
By default, the "Signal attributes high-, low scale value, unit" option in the "Filter" group is
selected when the "Import / Export" plugin is opened, if you wish not to import these attributes
unselect this option.
Result
The control modules and equipment modules are imported to the current PAA project.
See also
Importing control module types (Page 29)
18.10

Importing EM/EMT from PCS 7 without sequence chain

Objective
The EMs/EMTs created/edited and the logic in PCS 7 can be imported and used in PAA.
See also chapter Editing equipment modules on the function diagram (Page 148).
The following objects can be imported from PCS 7 into PAA:
● Own EM/EMT Parameters
● Parameters connected with EM/EMT parameters
● Signals (own and connected)
● Messages
● Control Module Assignments
● Control Modules
● Functions
● Sequencing (created by default)
● Characteristics
● Characteristics folder for different types of characteristics
● All characteristic parameters
Plant Automation Accelerator 3.0
Operating Manual, 04/2019, A5E46351208-AA
18.10 Importing EM/EMT from PCS 7 without sequence chain
Import from PCS 7 to PAA
181