Engineering in PAA
14.9 Hardware engineering with the configuration tool
14.9
Hardware engineering with the configuration tool
14.9.1
HW configuration tool
Introduction
The HW configuration tool is used to compile available, released hardware configurations. All
necessary components are generated at the same time. The applied rules are compatible with
PCS 7 V9.0. You can use the "HW configuration tool" plugin to configure different I/O modules
like ET 200M, ET 200iSP, ET 200PA SMART, ET 200SP HA, ET 200SP, AS Bundle, WS
Bundle, and PCS 7 BOX via the Plugins menu or via the icon on the toolbar as shown in the
figure below. This tool is used in bulk engineering.
120
Plant Automation Accelerator 3.0
Operating Manual, 04/2019, A5E46351208-AA