Meaning Of Symbols On The Display; Brightness Of Display - Siemens LMV36.520A1 Basic Documentation

23.2

Meaning of symbols on the display

23.3

Brightness of display

156/248
Building Technologies Division
Infrastructure & Citiies Sector
Fault status message
Flame present
Valve controlled
Ignition controlled
Fan motor controlled
Oil preheater on
Heat request from controllers
Parameter setting mode
Info mode
Service mode
Actuator closing
Actuator opening
Unit of current display
Figure 94: Meaning of display
Only available with backlit LCD:
The function of the backlit display is dependent on the type of basic unit.
The brightness of the display can be adjusted from 0...100% using parameter 126.
No. Parameter
126 Display brightness
Basic documentation LMV36...
23 Operating the AZL2... unit
CC1P7544en
25.09.2013