Saturn S300 Series Service Manual page 95

INK JET PRINTER OPERATION
Charge SPEC
Lock Keyboard
The default setup value is 100 (max.) of "Charge SPEC.". You need to
adjust it to get better print quality or decrease the height of message
printed at some situation. The procedures as below:
1. Enter <System Maintenance -3>, select <Charge SPEC>;
2. Use right/left <Adjust Key> to increase or decrease the setup
value or enter the value you wanted directly.
3. Press <Ok> to confirm it.
Caution: Over low value for default will cause bad print
quality or miss of print message.
It is used to lock some of the main menu depending on selection in
order to prevent unauthorized use. After the menu has been locked, it
cannot be used any more until you unlock the menu.
The procedures as below:
1. Enter<Main Menu-2>, select <Lock Keyboard>, enter the
password you set , it displays as below:
Status:
Printer is ready
Saturn Technologies Co. Ltd
Message Edit
Message Store
Print Setup
Ok
2. Use <Direction Key > to move the select box to the menu you
want to be lock, use left/right<Adjust Key> to change the lock
status of the menu.
3. Press <Ok> to confirm
Caution: Once you forget the password and can not unlock
the menu, please contact Saturn for solution.
5-43
Lock Keyboard
2005 / 12 / 26 12:00
System Setup
System Maintenance
Exit
Current Flow Time: 4200