Saturn S300 Series Service Manual page 127

Maintenance
Procedure 7
Printer Long Term Storage
Long-term
Storage?
Drain out fluid
from the printer
Remove both
replenishment
bottles (make-up
and/or ink)
Clean out the ink and
make-up tank gap,
and then put them
into clean tank again.
Clean out the nozzle
manually
Figure 6-17. Printer Storage (Procedure 7)
Start
No
Yes
Shutdown the
printer to
"Printer is off".
Switch off the
power supply.
Cover printer
and printhead.
WARNING: Refer to Ink Maintenance Flow Charts
on page 6-16 before performing ink
maintenance procedures.
6-24