Saturn S300 Series Service Manual page 61

INK JET PRINTER OPERATION
Ink Jet Printer Operation
Printer Startup Procedure
Press the "Power Supply Switch" at the right side of cabinet. About 2 seconds later
"Printer is off" will be displayed on the "System Status Zone" at LCD screen.
Printer is ready to startup. Following is 2 methods to start up the printer:
1.
2.
Caution: If not start up printer at short period after maintenance, it is better
to perform normal shut down procedure in order to recover the ink remains at ink
system.
Printer Shutdown Procedure
There are two methods to shutdown the printer：
1.
2.
Caution: If not start up printer at short period after maintenance, it is better
to perform normal shut down procedure in order to recover the ink remains at ink
system.
Normal startup: press (ink jet key) for 2 seconds. "Printer is starting up",
"Printer is ink on", "Printer is ready" will be displayed on the status zone of
the screen successively. Printer will be ready to print two minutes later. The
printer has now completed the normal start up sequence. Press Print, the LED
on the key will be light up. The status zone of the screen will display "Printer is
ready to print". Then the printer can print message.
Quick startup:
Enter "Service Menu-1", select "Ink On/Off", and "Printer is Ink on" will
be displayed on the "System Status Zone" of the screen. Now the printer
has been jet the ink.
Then select <HV On/Off>, "Printer is ready" will be displayed on the
"System Status Zone" of the screen. Till now the printer finishes the
quick start up sequence.
Press <Print Key> to enter printing status and "Printer is ready to print"
will be displayed on the "System Status Zone" of the screen. Then the
printer is ready to print messages on objects.
Normal shutdown: Press <INK JET KEY> for above 2 seconds. The printer will
execute normal shutdown procedure, this procedure cost about 4 minutes.
"Printer is shutting down", "Printer is off" will be displayed successively on
the "System Status Zone" of the screen. Switch off the printer after 'printer is
off'.
Caution: DO NOT switch off printer before "Printer is off" displayed
on the screen. Otherwise it is possible to lead to some problems when the
printer starts next time. Follow the way of normal shutdown is suggested.
Quick shutdown: If the printer required shutdown less than 5 minutes, you can
shutdown the printer in quick shutdown procedure in order to avoid autoflush
procedure in the normal shutdown sequence. Following steps are procedure of
"Quick Shutdown Sequence":
Press <Print Key> to go to the status of "Printer is ready".
Enter "System Maintenance", select the function of "Ink On/Off", about 5
seconds later the printer will be shutdown quickly and "Printer is off"
will be displayed on the "System Status Zone" of the screen.
5-9