Saturn S300 Series Service Manual page 76

INK JET PRINTER OPERATION
Upload Message
To upload the message from inkjet printer memory to USB memory
disc, you can use "Upload Message" function, the procedure as
below:
1. Connect USB memory disc to the USB port of the ECU board.
2. Enter< Message Store-2>, select <Upload Message>, it displays as
below:
Status:
Printer is ready
Saturn Technologies Co. Ltd
Message Name
3. It displays all the messages saved in USB memory disk at the
"Parameter Setup Zone" of the screen.
4. Use up or down <Direction key> to move the select box to the
message you want to download, and the message displays on the
"Message Edit Zone" of the screen.
5. Use "Select/Cancel" function to select or cancel the message.
6. Repeat the steps above you can select several pieces of message
and use "SHIFT+A" to choose the entire message in USB memory
disc.
7. Press <OK> to confirm the settings.
Caution：When uploading the message, if the name of the
message is as the same as some message in USB memory disc, there
is a dialog box will show up at the screen, you could select "yes" to
replace the original one "all" to replace all, "no" not to replace,
"cancel" to give up uploading or "save as" to change the name of
message and then upload.
5-24
Height
CRXX
CRXX
XZXX
Select/Cancel
Ok
Download Message
2007 / 12 / 13 12:00
Width
16
60
16
324
8
120
Exit
Current Flow Time: 4200