Saturn S300 Series Service Manual page 124

Maintenance
Procedure 4
Draining Fluid from the Printer
Use a container
to hold the pipe
with blue mark.
(Refer to picture
above)
Enter system
maintenance to
select "Auto
Reverse
main
(Ensure
output
connector at the
downside).
Press
for continues.
Figure 6-14. Draining Fluid (Procedure 4)
Start
Drain".
the
filter.
the
"Enter"
The printer will
be shutdown
automatically
about 4 minutes
Repeat "Auto
Flushing"
procedure until
only a little fluid
Put
tighten the ink
tank cap again.
Return to
Figure 6-10.
WARNING: Refer to Ink Maintenance Flow Charts
on page 6-16 before performing ink
maintenance procedures.
6-21
later.
left.
on and