Saturn S300 Series Service Manual page 118

Maintenance
Ink Maintenance Procedure
Introduction
Ink Maintenance
Procedure Safety
Precautions
This section describes all the procedures necessary to load fluids
into the printer, maintain the fluids in the printer, and drain fluids
from the printer.
All the procedures required to handle printer fluids have been
broken down into their simplest forms. Flow charts are used to
illustrate each of the procedures. The flow charts are easier to
follow if you are familiar with the equipment. It is recommended
that you be familiar with how to perform these procedures.
The following safety procedures are recommended for all
procedures in this section.
WARNING: Ground the printhead to a metal service tray. Refer to
Chapter 2, Safety, in this manual for the
recommended printhead grounding methods.
WARNING: Wear safety glasses with side shields when working
with fluids.
WARNING: Ensure that the work area is well-ventilated.
WARNING: Pour all unused fluids into a grounded, metal
container.
WARNING: Properly dispose of all unused fluids in approved
containers and in an approved manner.
6-15