Saturn S300 Series Service Manual page 40

Installation
Unpack and Inspect the Printer
Remove the Printer from
its Carton
Connect Electrical
Power
Remove the printer from its carton and visually inspect it for
damage. Examine the control unit, umbilical, and printhead closely.
The printer is packed carefully at the SATURN manufacturing
facility. If any damage is noted, file damage claims with the carrier.
The printer is available at 110/220 VAC. Complete the following
steps to connect AC power to the printer.
Prepare an electrical source of 110/220 ± 10% VAC, 50/60 HZ.
Plug the power cord plug into the appropriate electrical
source.
Push the switch of the AC power supply to turn on the printer.
Push the switch of the AC power supply again to turn off the
printer.
4-5