Saturn S300 Series Service Manual page 125

Maintenance
Procedure 5
Flushing Viscosimeter
Open
AGITATION in turn.
Close
PUMP in turn after
one minute later.
Figure 6-15. Flushing Viscosimeter (Procedure 5)
Start
Place ink tank
cap into a
beaker which
with 150 ml
make-up inside
(refer to Figure
6-25, Page
Select "Manual
Control" in
<System
Maintenance>.
PUMP,
AGITATION,
Use a container to
hold the pipe with
blue mark. (Refer to
Figure 6-12)
Open
Churn Valve in
turn;
them until all
the ink flow out
from
viscometer.
Switch off the
power supply.
Return to
Figure 6-10.
WARNING: Refer to Ink Maintenance Flow Charts
on page 6-16 before performing ink
maintenance procedures.
6-22
Pump,
close