Installation
Site Preparation
Determine Printer
Location
Electrical Requirements
Position the printer near the conveyor. Consider the following
guidelines:
The area selected should be free of vibration.
Make certain that the print head can reach the conveyor
and there is some space left for operator to disassembly
and clean the print head.
Make certain that the power supply and ground wire can
reach the printer.
There should be enough space left for opening the door to
maintain and service the printer.
Voltage / Frequency
The Microdot printer operates at 110/220 VAC±10%, 50-60 Hz.
Power Consumption
90 Watts maximum, 50 Watts typical.
4-4