Saturn S300 Series Service Manual page 81

INK JET PRINTER OPERATION
Print Setup
Print definition: Following is the commonly print status. Other status is not list.
Print Delay
After the printer received the signal from the product detector, it
delayed to print automatically. The higher the value of Print Delay is,
the longer the delay time will be. The print delay can be set up at '0'
(no delay). Print Delay is used to adjust the position of the message
printing on the product, which is effective to single product only.
The procedures as below:
1. Enter <Print Setup-1>, select <Print Delay>, it displays as below:
Status:
Printer is ready
Saturn Co. Ltd
Product Detect
Print Delay
Print Interval
Ok
2. Use right or left <Adjust Key> to change the detector trigger way.
High or Low two ways can be chosen.
3. Use up/down <Direction key> to move the select box to the "print
delay", and enter the value directly or use right/left <Adjust Key>
to adjust.
4. Use up/down <Direction key> to move the select box to the "print
interval", and enter the value directly or use right/left <Adjust
Key> to adjust the value as the interval time.
5. Press <OK> to confirm the settings.
5-29
Normal Print
Print Delay
Print Reverse
Print Inverse
Bolding print
Print Delay
2007 / 12 / 13 12:00
Low
50 (0~32000)
30
Cancel
Current Flow Time: 4200
Exit