Saturn S300 Series Service Manual page 63

INK JET PRINTER OPERATION
Insert Clock
The printer can print real time, including year, month, date, hour,
minute, second. And the time can be offset by days or hours when
you want to print the expiry time.
The procedure of "Insert Clock" as following:
1. Enter <Message Edit-2>, select <Insert Clock> function, displays
as below:
Status:
Printer is ready.
2007 / 12/ 26
12 : 24 : 36
Format
YYYY
HH
Offset
0
OK (F1)
2. Using <Direction Key> to move the select box to the position
needed.
3. Use Right or Left <Adjust Key> to change format. Julian date
function is available at the first select box, press left <Adjust
Key> to call Julian date.
4. Using <Direction Key> to move the select box to the offset days
or hours, enter the number of days or hours you want to offset if
you want to offset the time by days or hours.
5. Select <Ok> to finish inserting clock. And the clock information
you select will be displayed in the "Message Edit Zone".
Caution:
In the first line, the formats of the clock are as below:
YYYY-- Year, 4 digits, like "2010"; YY-- Year, 2 digits, like "10";
MMM-- Month, 3 digits, like "JAN"; MM-- Month, 2 digits, like "01";
DD-- Date, 2 digits, like '12';
st
In 1 line, the three list forward slash can be selected as below:
"/", "\" SPACE or no slash；
nd
In 2 line, the formats of the clock are as below:
HH（Hour） 、MIN（Minute） 、SS（Second） ；
In 2nd line, the three list forward slash can be selected as below:
":", "/", "\" SPACE or no forward slash；
Caution: If you want to change the format or offset time of the
clock inserted, move the cursor to the "clock" block, and this block is
reverse video in the "Message Edit Zone" of the screen, then select
5-11
Insert Clock
2007 / 12 / 26 12:00
DD
/ MM /
SS
: MM :
Days
0 Hours
Exit (F3)
Current Flow Time: 4200