Saturn S300 Series Service Manual page 106

Maintenance
Introduction
Scheduled (preventive)
Maintenance
Ink Maintenance
Print Quality (Nozzle Drive
Set-up Procedure)
This chapter contains the recommended preventive maintenance
schedule. Following the recommendations provided in this
schedule will help you keep your printer in peak operating
condition, help you become familiar with how the printer works,
and may help you more quickly identify the cause of problems
when they occur.
Scheduled Maintenance - - - - - - - - - - turn to page 6-4.
Ink maintenance is the term given to the procedures which
describe the following processes:
Prime fluid
Auto Flush
Flushing System
Drain Fluid
Flushing Viscosimeter
Flow time Calibration
Preparing the printer for storage
Setting the nozzle drive
Changing ink (new type of ink)
Each of these procedures is detailed in this chapter. Refer to the
page number listed below.
Hydraulic System Maintenance Procedures - - -6-18.
This section helps you locate the print window, or the range of
nozzle drive values which yield good print quality. It is an
expanded explanation of the nozzle drive set-up procedure
shown in a flow chart in the Ink Maintenance section on page
6-37.
Print Quality
(Nozzle Drive Set-up Procedure) - - - turn to page 6-28
6-3