Saturn S300 Series Service Manual page 65

INK JET PRINTER OPERATION
Reset Serial Number
This function is only to change the current value of serial number,
cannot change other parameter of the serial number.
The steps of resetting serial number are as below;
1. Enter<Edit Message-2>, select <Reset Serial Number>, it displays
as below:
Status:
Printer is ready
2007 / 12/ 13
12 : 24 : 36
0013
Name
Change Start Value
0
1
OK (F1)
2. Use <Direction Key> to move the Parameter Setup Zone to the
position of the serial number that requires to be changed, and the
serial number will be showed in reverse video type.
3. Use <Adjust Key> to "Change Start Value" and choose "yes", and then
use right <Direction Key> to move to the "Current Value" to insert a
new value.
4. Repeat the steps above to change current values for other serial
number.
5. After changing choose "OK" to finish.
CAUTION: After "Reset Serial Number" finished, the "repeat
times" (when it is not 1) of this serial number will be counted again.
5-13
Restore Serial Number
2007 / 12 / 13 12:00
Current Value
yes
0070
no
076
Exit (F3)
Cancel (F2)
Current Flow Time: 4200