Saturn S300 Series Service Manual page 27

Equipment Description and Component Identification
3. Ink Tank
The ink tank stores fresh ink for printer.
4. Makeup Tank
The Makeup tank stores Makeup and adds Makeup to the ink when
ink becomes too dense.
5. Support Tray
The support tray carries the whole hydraulic system, ink and
Makeup tank, which can be pulled out in order to check the
hydraulic system.
Note: Please loose the support tray lock before pulling out the
tray.
6. Viscosimeter
The viscosimeter includes a metal float and a sensor to monitor
the viscosity coefficient of the ink.
7. Main Ink Filter
The main ink filter is installed at the right side of the bracket
(Figure 3-6). It filtrates and cushions the ink going to hydraulic
system.
8. Makeup Filter
The Makeup filter filtrates the Makeup ink going to flush pipe in
the printhead (Figure 3-6), and prevents dust into printhead.
9. Churn Filter
The churn filter filtrates the ink going to the viscosimeter (Figure
3-6), and prevents dust into viscosimeter.
10. Recovery Filter
The recovery filter filtrates un-used ink from gutter (Figure 3-6),
and prevents dust into ink tank.
3-9