Saturn S300 Series Service Manual page 68

INK JET PRINTER OPERATION
Insert 2D Code
Caution：2D Code can be various according to the changing of
system time and serial number.
The procedures are as follow:
1. Enter <Message-4>, it displays as below:
Select "2D Code", it displays as below:
3. Use Up or Down <Direction key> to move the select box, setup each
parameter. Use <Adjust Key> to change Code Type and Message
Type.
4. If choose "Clock" in "Message Type" as 2D Code, select "Clock
Format (F3)" to set the format of clock. Refer to Page 5-11 for
detailed procedures.
5. If choose "Serial No." in "Message Type" as 2D Code, select "Serial
Number Format(F3)" to set the format of serial number. Refer to 5-12
for detailed procedures.
6. If choose "String" in "Message Type" as 2D Code, type into value
and characters to form 2D code. It displays as follow:
5-16