Sensor Cables - Roland R1000 Series Manual

Technical data
Fig. 4: Dimensions of IS/IE sensors
2.5

Sensor cables

Cable marking:
The cables have quick disconnects at both ends. The plug at the control unit side is always straight.
SCI20S-GG
SCI20S-GW
SCI20S-GG-TE
Applicable to all cables: Bending radius:
Cable extension SCI20S-GG-TE
The cable extension SCI20S-GG-TE is inserted between the control unit and the existing regular
sensor cable SCI20S-GG, SCI20S-GW.
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
18
Double Sheet Detector R1000-series I20
with integrated fieldbus interface
with straight cable socket at the sensor
with right angle cable socket at the sensor
extension cable for sensor cable (also use as quick disconnect)
Cable diameter:
The sensor cable is an active component of the sensor technology.
Note
The technical data of the sensors is valid only if the cable specification is
met. A shielded cable must be used.
The cable length can be to up to 50 m. Following the rule "the shorter the
better" generally leads to better measuring results.
Note: If the sensors ISQ/IEQ42FS (with firmly connected cable) are used,
this cable must be used for extending the sensor cable.
Manual
50 mm at fixed installation
100 mm at flexible installation
7.1 mm
Suitable for drag chains, oil-proof, PUR jacket
Superflex Tronic(C)PUR TP 4 x 2 x 0.25 mm²
B0060191 / Rev. 1.7