Start-up
System parameter 11: Specifying the number of connected sensors.
System Parameter: 11
pairs of sensors
Fig. 104: Specifying the number of sensors for a 4-channel unit
Possible choices:
•
1 pair of sensors
•
2 pairs of sensors
•
3 pairs of sensors
•
4 pairs of sensors
System parameter 12: Specifying the type of sensor.
System Parameter: 12
sensor type
IS42-30 / IE42-30
Fig. 105: Specifying the type of sensor
Possible choices:
•
IS42-30GS / IE42-30GS (also for ISQ42S / IEQ42S)
•
IS20-30GS / IE20-30GS
•
ISQ160S / IEQ160S
System parameter 13: Specifying the settling time.
System Parameter: 13
default settlingTime
250 ms
Fig. 106: Specifying the settling time
The settling time is entered here, which will be preset as "desired" settling time in the "Clear
program parameters" step. This time will be used if the existing settling time is lost due to deletion
of the program parameters and a usable setting is no longer available.
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
126
Double Sheet Detector R1000-series I20
with integrated fieldbus interface
1
Changing the current configuration will delete all stored program
Attention
parameters. This means that for all types of sheets the nominal
thickness values must be re-entered and the Teach-In must be
performed again.
Manual
B0060191 / Rev. 1.7