Sensor Cables - Roland R1000 Series Manual

Technical data
2.7

Sensor cables

Suitable cable type:
• Superflex (C)Y PURKOMBI 2 x 1,0 mm² + 4 x 2 x 0,25 mm²
• The cable is oil-proof and suitable for drag chains
- Bending radius flexible use min. 110 mm
Cable marking:
• for PW42AGS:
SCPWS-GG (straight receptacle at the sensor)
SCPWS-GW (right angle receptacle at the sensor)
The cable has quick disconnects at both ends. The plug at the control unit side is always straight.
2.7.1 Sensor cable SCPWS for PW42AGS sensor
Cable socket, sensor side
1 8
7
9
3 6
4 5
Socket contacts
Right angle cable socket, sensor side
Fig. 4: Sensor cable SCPWS
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
16
Double Sheet Detector R1000 series UDK20
with integrated fieldbus interface
Note The sensor cable is an active component of the sensor technology. The
technical data of the sensors is valid only if the cable specification is met. A
shielded cable (2 x 1,0 mm² + 4 x 2 x 0,25 mm²) must be used. The cable
length can be to up to 50 m. Following the rule "the shorter the better"
generally leads to better measuring results.
Manual
Cable plug, unit side
54
1 grey
2 pink
3 red
4 black / violet
5 blue
6 brown 1 mm²
7 brown
8 white 1 mm²
9 green
Enclosure blank (Shield)
B0048191 / Rev. 1.5
8 1
7
9
6 3
5 4
Plug contacts