Communication with the PLC
6.3.10 Teach-In 1-sheet - dynamical
BIN
Teach-In 1-sheet
BIN
Teach-In range
BOUT
Function result
1)
BOUT
Function fault
OUT
Ready
Fig. 36: Timing diagram for Teach-In 1-sheet – dynamically
1)
In case of "Function fault" = 1 "Function result" will sometimes remain at 0.
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
78
Double Sheet Detector R1000-series I20
with integrated fieldbus interface
> 0 ms
Teach-In range
The measured timing periods were determined with12 Mbit-
Note
Profibus. These timing periods can vary with different transmission
rates and bus systems. The cycle time of the PLC has not been
taken into account.
Manual
< 15 ms
< 0,5 sek
B0060191 / Rev. 1.7