B0060191 / Rev. 1.7
6.3.7
Zero adjust
BIN Teach-In 0-sheet
Zero adjust
BOUT
Function result
BOUT
Function fault
OUT
Ready
Fig. 33: Timing diagram for Teach-In / zero adjust
1)
In case of "Function fault" = 1 "Function result" will sometimes remain at 0.
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Detector R1000-series I20
with integrated fieldbus interface
1)
The measured timing periods were determined with12 Mbit-
Note
Profibus. These timing periods can vary with different transmission
rates and bus systems. The cycle time of the PLC has not been
taken into account.
Manual
"1" if fault
0V if fault
< 150 sek
Communication with the PLC
< 15 ms
75