Roland R1000 Series Manual page 105

B0060191 / Rev. 1.7
7.4.2.2 Sub structure "Program parameters" of the operating mode "Frequency"
(Monitoring Parts for Hardened / Tempered Properties and Materials Mix up)
Program No.
Sensor number
Frequency
Material not available
Lower limit value TL
Upper limit value TU
Settling time desired / actual
Teach-in part A
Teach-in part B
Fig. 47: Sub structure „program parameters" of the operating mode Frequency
7.4.3 Sub structure "System adjustment" (details in 7.8)
System adjustment
Zero adjust
Test sensor distance
Deviation distance
Sensors distance mm
Control sensors
Fig. 48: Sub structure „system adjustment"
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Manual
Double Sheet Detector R1000-series I20
with integrated fieldbus interface
1 ... 255
Sensor number
1 / 2 / 3 / 4 / 1+2 / 1+3 / 1+4 / 2+3 / 2+4 / 3+4 /
1+2+3 / 1+2+4 / 1+3+4 / 2+3+4 / 1+2+3+4
8 Hz - 25 KHz
(depending on sensor type)
TL% (0-99%) and absolute
TU% (100-180%) and absolute
2 / 4 / 8 / 15 / 25 / 100 / 250 ms
– ok
– missing
– dynamic all / single
– static all / single
– no
– dynamic all / single
– static all / single
– no
– yes / all (for all sensors selected in the
system configuration under "sensor number")
– no
– yes
Indication of deviation from taught sensor gaps
Indication
– mm
– inch
– no
– yes
Start-up
105