Roland R1000 Series Manual page 130

Start-up
System parameter 21: Setting the internal system zeroing.
System Parameter: 21
Internal analog Zero
Fig. 114: Setting the internal system zeroing
This parameter is only for the Service personnel.
System parameter 22: Setting the internal system gain.
System Parameter: 22
Internal analog Gain
Fig. 115: Setting the internal system gain
This parameter is only for the Service personnel.
System parameter 23: Indication of MAC ID for Profinet bus systems.
System Parameter: 23
Network
Fig. 116: MAC-ID
Here the MAC ID is shown, if the system is equipped with a Profinet bus system.
System parameter 24: Bus diagnostics and interrogating the fieldbus process data.
System Parameter: 24
IN/OUT Bus.proc.data
Fig. 117: Interrogating the field bus process data
This parameter is split into 4 groups:
a) Internal Fieldbus information (here not relevant, thus not shown)
b) Parameter channel IN/OUT
c) Process channel OUT
d) Process channel IN
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
130
Double Sheet Detector R1000-series I20
with integrated fieldbus interface
no
no
MAC ID
Manual
B0060191 / Rev. 1.7