Versions Of The Control Unit I20 - Roland R1000 Series Manual

Technical data
2.2

Versions of the control unit I20

The control unit article key is coded as follows:
Control unit I20 with optocoupler interface and Fieldbus interface
all sensors are directly connected at the control unit by pluggable contacts.
I20-2-xx-S-FP
A
Based on the article key shown above, the following versions are available:
I20-2-xx-S
I20-4-xx-S
I20-2-xx-S-FP
I20-4-xx-S-FP
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
12
Double Sheet Detector R1000-series I20
with integrated fieldbus interface
B C D E
Data backup via fieldbus
or serial USB interface
Manual
A Type of unit
B Number of sensors
C Fieldbus code
D Connection
E Enclosure
xx Bus code
PR
CN
DN
DNT
IN
PN
CP
CC
EN
ET
Control unit for wall mounting, connection of up to 2 sensors,
Fieldbus interface
Control unit for wall mounting, connection of up to 4 sensors,
Fieldbus interface
Control unit for front panel mounting, connection of up to 2 sensors,
Fieldbus interface
Control unit for front panel mounting, connection of up to 4 sensors,
Fieldbus interface
B0060191 / Rev. 1.7
I20
2 up to 2 sensors
4 up to 4 sensors
XX Bus code
S Cables pluggable
FP Front panel mounting
Profibus-DP
ControlNet
DeviceNet (B-coded)
DeviceNet (A-coded)
Interbus-S
ProfiNet IO
CanOpen
CC-Link
EtherNet/IP
EtherCAT