Writing A Program To The Memory (Eprom) Via The Master Memory (Eeprom) With A Commercially Available Rom Programmer - Panasonic FP-M Hardware Manual

1-4. Programming Tools for FP-Ms
3) Writing a program to the memory (EPROM) via the master memory (EEPROM) with a
commercially available ROM programmer
[Program in FP-M control board's internal RAM → Master memory (EEPROM) → Commercially available ROM
programmer's internal memory → Memory (EPROM)]
Necessary tools
• FP Programmer II: AFP1114
• FP-M peripheral cable (for FP Programmer II)
1 m/3.281 ft.: AFC8521
3 m/9.843 ft.: AFC8523
• Commercially available ROM programmer:
We recommend Aval Data Corporation's
PECKER 11.
• Master memory (EEPROM): AFP5207
• Memory (EPROM): AFP5202
Note:
• Refer to page 106, "5-7. How to Program ROM"
and "FP PROGRAMMER II Operation Manual",
for details about programming ROM.
16
FP-M control board
FP-M peripheral cable
(for FP Programmer II)
FP PROGRAMMER
ST AN OR OT FN/P
X•WX Y•WY R•WR L•WL FL
NOT STK TM CT (BIN)
DT/Ld IX/IY T•SV C•EV K/H
= D < > SHIFT
C D E F SC
(-)
8 9 A B
OP
SRC
4 5 6 7
0 1 2 3 READ
(HELP) (DELT)
ACLR ENT WRT
CLR INST
FP Programmer II
Memory
(EPROM)
Master memory
(EEPROM)
Commercially available
ROM programmer