Panasonic FP-M Hardware Manual page 208

8-6. Special Internal Relays
Address Name
R9033 Print-out flag
R9036 I/O link error flag
R9037 RS232C error flag
R9038 RS232C receive
F144
flag (
R9039 RS232C send flag
F144
( )
R903A High-speed counter
control flag
R903B Cam control flag
200
F147 (PR)
ON while a
F147 (PR)
Refer to the
Turns ON when an I/O link error occurs.
Turns ON when an RS232C error occurs.
C types (C20RC/C20TC/C32TC) only
Turns ON when a terminator is received by the programmable controller
F144 (TRNS)
) using the
F144 (TRNS)
Refer to the
C types (C20RC/C20TC/C32TC) only
OFF while data is not been sent by the
ON after the data is sent by the
F144 (TRNS)
Refer to the
C types (C20RC/C20TC/C32TC) only
ON while a high-speed counter is controlled using the
(HC0R), F164(SPD0), and F165 (CAM0)
F162 (HC0S), F163 (HC0R), F164(SPD0), and F165
Refer to the
(CAM0)
instructions in the FP-M/FP1 Programming Manual.
F165 (CAM0)
ON while a
F165 (CAM0)
Refer to the
Manual.
Description
instruction is executed.
instruction in the FP-M/FP1 Programming Manual.
instruction.
instruction in the FP-M/FP1 Programming Manual.
F144 (TRNS)
F144 (TRNS)
instruction.
instruction in the FP-M/FP1 Programming Manual.
instructions.
instruction is executed.
instruction in the FP-M/FP1 Programming
instruction.
F162 (HC0S), F163