Programming Tools For Fp-Ms; Programming Tools; Npst-Gr Software; Fp Programmer Ii - Panasonic FP-M Hardware Manual

1-4. Programming Tools for FP-Ms

1-4. Programming Tools for FP-Ms

1. Programming Tools

Program editing can be done with a commercially available personal computer and FP Programmer II.

1) NPST-GR Software

Using the NPST-GR program editing software, programs can be easily created with any personal computer.
Necessary tools
• Computer: Commercially available personal computer
(IBM PC-AT or 100% compatible machine)
System required:
- Main memory: 550 KB or more free
- EMS: 800 KB or more free
- Hard disk space: 2 MB or more
- Operating system MS-DOS Ver. 3.30 or higher
- Video mode (display mode): EGA or VGA
• NPST-GR Software Ver. 3: AFP266538
• FP-M personal computer cable:
3 m/9.843 ft.: AFC8513
Notes:
• The .EXE files in NPST-GR Software are
compressed in the system disks. When
installing NPST-GR, you will have to expand
them.
• When using NPST-GR Software Ver. 2, refer to
page 220, "1. Differences Between NPST-GR
Ver. 2.4 and Ver. 3.1."
• Refer to page 106, "5-7. How to Program
ROM" and "NPST-GR Manual", for details
about writing programs using NPST-GR
Software.
• Refer to page 239, "8-14. Product Types", for
details about FP-M personal computer cable
and RS232C interface adapter.

2) FP Programmer II

With the hand-held FP Programmer II, such operations as writing,
reading, and retrieval of programs can be performed.
Necessary tools
• FP Programmer II: AFP1114
• FP-M peripheral cable (for FP Programmer II)
1 m/3.281 ft.: AFC8521
3 m/9.843 ft.: AFC8523
Notes:
• Refer to page 106, "5-7. How to Program ROM" and
"FP PROGRAMMER II Operation Manual", for details
about writing programs using the FP Programmer II.
• Refer to page 239, "8-14. Product Types", for details
about FP-M peripheral cable (for FP Programmer II).
14
FP-M control board
RS232C
interface
adapter
FP-M personal computer cable
Commercially available personal computer
(IBM PC-AT or 100% compatible)
NPST-GR Software
FP-M control board
FP-M peripheral cable
(for FP Programmer II)
FP PROGRAMMER
ST AN OR OT FN/P
X•WX Y•WY R•WR L•WL FL
NOT STK TM CT (BIN)
DT/Ld IX/IY T•SV C•EV K/H
= < >
D SHIFT
C D E F SC
(-)
8 9 A B
OP
4 5 6 7 SRC
READ
0 1 2 3
(HELP) ACLR (DELT) ENT WRT
CLR INST
FP Programmer II