Fp-M Transmitter Master Board (Mewnet-Tr) Specifications; Fp-M I/O Link Board (Mewnet-F) Specifications - Panasonic FP-M Hardware Manual

8-1. Performance Specifications

4) FP-M transmitter master board (MEWNET-TR) specifications

Performance specifications
Item
Rated operating voltage
Operating voltage range
Current consumption
MEWNET-TR system specifications
Item
Communication method
Syncronization method
Communication path
Transmission distance
Communication speed
Controllable I/O points
(See note.)
Controllable slave stations
(See note.)
Interface

5) FP-M I/O link board (MEWNET-F) specifications

Performance specifications
Item
Rated operating voltage
Operating voltage range
Current consumption
MEWNET-F system specifications
Item
Communication method
Syncronization method
Communication path
Transmission distance
Communication speed
Controllable I/O points
(See note.)
Controllable slave stations
(See note.)
Interface
Notes:
• The controllable I/O points are set by the operation mode selector.
• Controllable slave stations are determined by the number of unit I/O points used by system.
176
24 V DC
20.4 to 26.4 V DC
70 mA or less (at 24 V DC)
Two-lines, half-duplex
Asyncronous system
2-conductor cable (VCTF: 0.75 mm × 2 conductors)
Max. 400 m (1,312.34 ft.) with 2-conductor cable
Max. 700 m (2,296.59 ft.) with twisted pair cable
500 kbps
Max. 48 inputs and 32 outputs/FP-M transmitter master board (MEWNET-TR)
Max. 128 inputs and 96 outputs/control board
Combination of FP I/O transmitter units
(16, 8, 4 point input and output types)
RS485
24 V DC
21.6 to 26.4 V DC
50 mA or less (at 24 V DC)
Two-lines, half-duplex
Asyncronous system
2-conductor cable (VCTF: 0.75 mm × 2 conductors)
Max. 400 m (1,312.34 ft.) with 2-conductor cable
Max. 700 m (2,296.59 ft.) with twisted-pair cable
500 kbps
Max. 1,024 points per master unit
Max. 32 stations per master unit
RS485
Description
Description
Description
Description