Performance Specifications; Control And Expansion Board Specifications - Panasonic FP-M Hardware Manual

8-1. Performance Specifications

8-1. Performance Specifications

1. Control and Expansion Board Specifications

Item
Programming method
Control method
Program memory
Program capacity
Operation speed
Basic
Kinds of
instruction High-level
External input (X)
External output (Y)
Internal relay (R)
Special internal relay (R)
Timer/counter (T/C)
Auxiliary timer
Data register (DT)
Special data register (DT)
Index register (IX, IY)
MCR points
Number of labels (JMP,LOOP)
Differential points (DF or DF
Number of step ladders
Number of subroutines
Number of interrupt programs
High-speed counter
Advanced
control (1 channel)
functions
Manual dial-set
register
Pulse catch input
Interrupt input
Periodical interrupt
Note:
• The actual number of points that can be used is the total number of I/O points of the control board and
the expansion board.
170
Relay symbol
Cyclic operation
Built-in RAM (lithium battery backup)
EEPROM (master memory)/EPROM (memory) [optional items]
2.7 k type: 2,720 steps
5 k type: 5,000 steps
1.6 µs/step: basic instruction
81
111
208 points (See note.)
208 points (See note.)
1,008 points
64 points
144 points
Unlimited number of points (0.01 s to 327.67 s)
2.7 k type: 1,660 words
5 k type: 6,144 words
112 words
(For control board: 70 words, for intelligent boards: 42 words)
2 words
32 points
64 points
/
) Unlimited number of points
128 stages
16 subroutines
9 programs
Input: Count input (X0, X1)/reset input (X2)
Counting input mode: up mode, down mode, up/down mode, 2-phase mode
Counting range: –8,388,608 to 8,388,607
Max. counting speed: up/down mode 10 k Hz, 2-phase mode 10 k Hz
Min. input pulse width: 1-phase 50 µs • 2-phase 50 µs
2 potentiometers
Total 8 points (X0 to X7)
10 ms to 30 s (10 ms interval)
Description