Parts Terminology - Panasonic FP-M Hardware Manual

7-1. Analog I/O Board

3. Parts Terminology

4 Expansion connector
JP5
3 Input/output terminal
1 Expansion power supply connector:
2 Input terminal (15-pin):
3 Input/output terminal (12-pin):
4 Expansion connector:
5 Board number selector:
(See following page.)
6 Analog range selectors:
(See following page.)
130
5 Board number selector
6 Analog range selectors
JP4 JP3 JP2
B B
A A
JP1
B B
A A
2 Input terminal
Supplies power (24 V DC) to the analog board using the expansion
power supply cable.
Connect the input field devices (e.g., limit switch). This terminal
block is removable.
Connect the input/output field devices (e.g., limit switch,
solenoid). This terminal block is removable.
Connects the control board with internal circuit.
Sets the special data register for storing analog input and output
data by selecting the board number.
The analog I/O ranges are selectable with jumper pins on the
board.
1 Expansion power
supply connector