Panasonic FP-M Hardware Manual page 102

5-4. Programming with NPST-GR Software
• SCREEN MODE
You can select the NPST-GR screen mode between color and black/white.
MONO: Displays the screen in black and white.
COLOR: Displays the screen in color.
(Black/Cyan/Red/Magenta/Green/Bright Blue/Yellow or Brown/White)
• PLC TYPE
Before setting the configuration of the programmable controller and creating a program, you must specify the type of
programmable controller for which you create a program.
You can select from;
FP1 0.9 k: FP1 C14/C16 series
FP1/FP-M 2.7 k: FP1 C24/C40 series and FP-M (2.7 k) C20R/C20T/C32T
FP1/FP-M 5 k: FP1 C56/C72 series and FP-M (5 k) C20RC/C20TC/C32TC
FP3 10 k: FP3 (10 k)
FP3/FP-C 16 k: FP3 (16 k) and the FP-C (16 k)
FP5 16 k: FP5 (16 k)
FP10/FP10S 30 k: FP10 (30 k) and FP10S (30 k)
FP10 60 k: FP10 (60 k)
COM PORT
Specify the serial port which is connected to the programmable controller.
1: Use COM PORT 1
2: Use COM PORT 2
3: Use COM PORT 3
TRANS RATE (bps)
Specify the transmission rate for communication with the programmable controller or modem.
Select between 19200, 9600, 4800, 2400, 1200, 600 or 300.
For communication with the programmable controller, specify either 19200 or 9600.
If the clock frequency is a multiple of five, you must select 19200. If you do not select 19200,
NPST-GR will not communicate with the programmable controller.
DATA LENGTH
Specify the data length for communication with the programmable controller.
Select either 8-bit or 7-bit.
• LOGGED DRIVE/DIRECTORY
Specify the logged drive when you manage files.
DRIVE/DIRECTORY
Specify the logged directory when you manage files. Include a \ at the beginning and at the end of the directory,
eg., \npst\program\.
If you omit this, the root directory will be specified.
NOTE DISPLAY
Specify whether file notes, which are the notes entered for a file (such as filename and date), are to be
displayed when the disk file list is displayed.
ON: Displays the file notes.
OFF: Omits displaying the file notes.
• PROGRAMMING MODE
Select the programming mode for creating or editing a program.
Select from;
LADDER: The ladder symbol mode
B.LADDER: The Boolean ladder mode
BOOLN: The Boolean non-ladder mode
94