Specifications; General; Performance; Restriction Of Expansion - Panasonic FP-M Hardware Manual

7-7. FP-M I/O Link Board (MEWNET-F)

1. Specifications

1) General

Item
Ambient temperature
Ambient humidity
Storage temperature
Storage humidity
Breakdown voltage
Insulation resistance
Vibration resistance
Shock resistance
Noise immunity
Operating environment

2) Performance

Item
Rated operating voltage
Operating voltage range
Current consumption
Recommended cable
Insulation

3) Restriction of expansion

• One FP-M I/O link board (MEWNET-F) can be attached to the control board.

2. Dimensions

166
0 ˚C to +50 ˚C (32 ˚F to 122 ˚F)
30 % to 85 % RH (non-condensing)
–20 ˚C to +70 ˚C (– 4 ˚F to +158 ˚F)
30 % to 85 % RH (non-condensing)
Across external terminal and frame ground terminal: 500 V AC, 1 min
100 MΩ or more, between external terminal and frame ground terminal
(measured with a 500 V DC megger)
10 Hz to 55 Hz, 1 cycle/min: double amplitude of 0.75 mm (0.030 in.),
10 min on 3 axes
2
98 m/s (10 G) or more, 4 times on 3 axes
1,000 Vp-p with pulse width, 50 ns or 1 µs
(based on in-house measurements)
Must be free from corrosive gases and excessive dust.
24 V DC
21.6 to 26.4 V DC
50 mA or less (at 24 V DC)
Conductors
Jacket
184/7.244
Description
Description
Conductor:
Size: Min. 1.25 mm 2 (AWG16 or larger)
Resistance: Max. 16.8 Ω/km (at 20 ˚C/68 ˚F)
Cable:
Insulation material: Polyethylene
Insulation thickness: Max. 0.5 mm/0.020 in.
Jacket diameter: Approx. 8.5 mm/0.335 in.
(unit: mm/in.)