Specifications Of Control Board And Expansion Board; General; Performance - Panasonic FP-M Hardware Manual

2-1. Specifications of Control Board and Expansion Board

2-1. Specifications of Control Board and
Expansion Board

1. General

Item
Ambient temperature
Ambient humidity
Storage temperature
Storage humidity
Breakdown voltage
(See note.)
Insulation resistance
(See note.)
Vibration resistance
Shock resistance
Noise immunity
Operating environment
Rated operating voltage
Operating voltage range
Current consumption

2. Performance

Item
Programming method
Control method
Program memory
Program capacity
Operation speed
Basic
Kinds of
High-level
instruction
External input (X)
External output (Y)
Notes:
• No capacitor connected between DC terminal and frame ground terminal when the breakdown voltage
and insulation resistance test is performed.
• The actual number of points that can be used is the total number of I/O points of the control board and
the expansion board.
18
0˚C to +55˚C (32˚F to +131˚F)
30 % to 85 % RH (non-condensing)
–20˚C to +70˚C (–4˚F to +158˚F)
30 % to 85 % RH (non-condensing)
Transistor output type: 500 V rms for 1 min
Between DC terminal and frame ground terminal
Relay output type: 1,500 V rms for 1 min
Between output terminal and frame ground terminal
Min. 100 MΩ (measured with a 500 V DC megger)
Between DC terminal and frame ground terminal
10 Hz to 55 Hz, 1 cycle/min: double amplitude of 0.75 mm (0.030 in.), 10 min on 3 axes
Shock of 98 m/s 2 or more, 4 times on 3 axes
1,000 Vp-p with pulse widths 50 ns and 1 µs (based on in-house measurements)
Must be free from corrosive gases and excessive dust.
24 V DC
Controller power supply: 21.6 to 26.4 V DC
Input/output power supply: 20.4 to 26.4 V DC (C20T, C32T series)
Controller power supply: 0.2 A or less
Input/output power supply: Approx. 5 mA per an input point
Relay symbol
Cyclic operation
Built in RAM (lithium battery backup)
EEPROM (master memory)/EPROM (memory) [optional items]
2.7 k type: 2,720 steps
5 k type: 5,000 steps
1.6 µs/step, basic instruction
81
111
208 points (See note.)
208 points (See note.)
Description
22.8 to 26.4 V DC (C20R series)
Approx. 3 mA per an output point (except load current)
Description