5. Make sure that the source drive and the target drive are specified correctly. The "source drive" shows the
drive which the NPST-GR system disk is in. The "target drive" shows the drive onto which you want to
install NPST-GR.
When the source drive and the target drive are specified correctly, select "YES" and press
If not, select "NO" and press
When you select "YES," the following screen will appear:
NPST-GR Installation Program
The NPST-GR will be installed on drive C.
OK?
***************************************************
*
***************************************************
6. Check the message. To install, select "YES" and press
If you do not want to install, select "NO" and press
When the installation is complete, "C:\NPST3" will appear.
Note:
• When NPST-GR is installed successfully, the following files are stored in the NPST3 directory:
NPST.EXE
NPSTE.EXE
NPST.HLP
NPSTP000.CIG
Enter
. You will return to the previous screen.
Select YES, and the installation will start.
Contains a program which starts NPST-GR.
Contains the system program for NPST-GR.
Contains help messages.
Contains information for printer control.
5-4. Programming with NPST-GR Software
Ver.3.1
Y E S
N O
*
Enter
. The installation will start.
. You will return to the previous screen.
Enter
Enter
.
91