Panasonic FP-M Hardware Manual page 68

4-3. Wiring
Wiring using flat cable connector
• The following shows the wiring for a flat cable connector.
FP-M control board
9600
19200
• Connect "No. 1" on the flat cable to the terminal marked " " on the I/O connector for each board.
Applicable flat cable
Number
AWG #28 stranded wire
(7 leads of 0.127 dia.)
Product types
Board type
C20T, C20TC
control board
C32T, C32TC
control board
M1T-E expansion
I/O board
M1T-EI expansion
input board
M1T-EO expansion
output board
60
(BATT.)
EPROM EPROM
RUN PROG. ERR ALARM.
RUN REMOTE PROG.
Flat cable connector
No. 1
Pitch Rated current
1.27 mm
Number of pins
Output: 16
Input: 20
Output: 34
Input: 30
Output: 34
Input: 40
Connector B: 20
Connector A: 40
Connector B: 34
Connector A: 34
1 A
Flat cable connector
APL9531 (1 m), APL9532 (2 m)
APL9541 (1 m), APL9542 (2 m)
AFB8531 (1 m), AFB8532 (2 m)
AFB8521 (1 m), AFB8522 (2 m)
AFB8531 (1 m), AFB8532 (2 m)
AFB8541 (1 m), AFB8542 (2 m)
APL9541 (1 m), APL9542 (2 m)
AFB8541 (1 m), AFB8542 (2 m)
AFB8531 (1 m), AFB8532 (2 m)
Connector
AXM116415
AXM120415
AXM134415
AXM130415
AXM134415
AXM140415
AXM120415
AXM140415
AXM134415