Configuring Npst-Gr - Panasonic FP-M Hardware Manual

5) Configuring NPST-GR

Selecting [NPST CONFIGURATION] from the menu window
Before you create a program, you must first configure the settings and change the default settings if necessary.
If the programming screen is displayed, press
Procedure
1. Move the cursor to an option on the NPST menu with the up and down arrow keys.
The submenu which belongs to the option you select will be displayed.
[ NPST MENU ]
EDIT A PROGRAM
COMMENTS
SEARCH
MONITOR
RELAYS/REGISTERS
CHECK A PROGRAM
NPST CONFIGURATION
PLC CONFIGURATION
PROGRAM MANAGER
IC CARD PROGRAM MANAGER
EXIT NPST-GR
PLC TYPE [ FP1/FP-M
PLC MODE [
PROGRAM NAME [
USE/MAX (STEP) [
2. Press Enter or the Right arrow key.
The cursor will move to the submenu. The option currently selected with the cursor will blink.
[ NPST MENU ]
EDIT A PROGRAM
COMMENTS
SEARCH
MONITOR
RELAYS/REGISTERS
CHECK A PROGRAM
NPST CONFIGURATION
PLC CONFIGURATION
PROGRAM MANAGER
IC CARD PROGRAM MANAGER
EXIT NPST-GR
PLC TYPE [ FP1/FP-M
PLC MODE [
PROGRAM NAME [
USE/MAX (STEP) [
3. Press .
Enter
4. Move the cursor to the item you want to select with the up and down arrow keys.
Select an option with the right and left arrow keys.
[ NPST CONFIGURATION ]
SCREEN MODE
PLC TYPE
COM PORT
TRANS RATE(bps)
DATA LENGTH
LOGGED DRICVE/DIRECTORY
DRIVE
DIRECTORY
[
NOTE DISPLAY [
PROGRAMMING MODE
NOTE : SPECIFY TRANS RATE TO 9600 or 19200bps TO CONNECT WITH PLC DIRECTLY
<SCREEN 1> window
Esc to display the "NPST MENU" window.
[ NPST CONFIGURATION ]
1.NPST CONFIGURATION
5k ]
OFFLINE ]
]
0/ 7679]
**= NOT AVAILABLE
[ NPST CONFIGURATION ]
1.NPST CONFIGURATION
5k ]
OFFLINE ]
]
0/ 7679]
**= NOT AVAILABLE
[ MONO / COLOR ]
[ FP1/FP-M 5k ]([ENTER]:OPENS SELECTION WINDOW)
[ 1 2 3 ]
[ 19200 / 9600 / 4800 / 2400 / 1200 / 600 / 300 ]
[ 8 / 7 ] bits
[ A B C D E ]
ON / OFF ]
[LADDER/ B.LADDER / BOOLN ]
5-4. Programming with NPST-GR Software
WINDOW OF PLC TYPE)
]
93