Wiring Description For I/O Power Supply (C20T, C32T, M1T-E, M1T-Ei, And M1T-Eo Series) - Panasonic FP-M Hardware Manual

4) Wiring description for I/O power supply (C20T, C32T, M1T-E, M1T-EI, and M1T-EO series)

Input side
• Since C20T is supplied input power through the internal circuit, the input voltage is not needed.
• Do not exceed the I/O current capacity given on the previous page.
C20T control board
19
20
Switch
Output side
• If the load current is 0.8 A or more, supply external power.
• If the load is 0.8 A or less, such as for LEDs, you can use the built-in DC power supply (24 V).
• Do not exceed the I/O current capacity given on the previous page.
C20T control board
15
16
Max.
0.8 A
• Load current
Board type
C20T, C32T, M1T-E, M1T-EO
1
2
1
2
24 V DC
External
power supply
Current capacity
0.8 A/point, 5 A/common
C20T control board
19
20
+
Vcc
Input
–
0 V
Sensor
C20T control board
15
16
LED
4-3. Wiring
1
2
1
2
51