Panasonic FP-M Hardware Manual page 27

Item
Internal relay (R)
Special internal relay (R)
Timer/counter (T/C)
Auxiliary timer
Data register (DT)
Special data register (DT)
Index register (IX, IY)
MCR points
Number of labels (JMP,LOOP)
Differential points (DF or DF
Number of step ladders
Number of subroutines
Number of interrupt programs
Advanced High-speed counter
control (1 channel)
functions
Manual dial-set
register
Pulse catch input
Interrupt input
Periodical interrupt
RS232C port
(See note.)
Clock/calendar
(See note.)
I/O link
Pulse output
(See note.)
Constant scan
Adjustable input time filtering
Self-diagnosis function
Memory backup (at 25˚C)
Notes:
• The RS232C port and clock/calendar functions are available for the C types (C20RC, C20TC and C32TC).
• The pulse output function is available for the transistor output type.
• The two pulse outputs, Y6 and Y7 cannot be used at the same time.
1,008 points
64 points
144 points
Unlimited number of points (0.01 s to 327.67 s)
2.7 k type: 1,660 words
5 k type: 6,144 words
112 words
(For control board: 70 words, for intelligent boards: 42 words)
2 words
32 points
64 points
/
) Unlimited number of points
128 stages
16 subroutines
9 programs
Input: Count input (X0, X1)/reset input (X2)
Counting input mode: up mode, down mode, up/down mode, 2-phase mode
Counting range: –8,388,608 to 8,388,607
Max. counting speed: up/down mode 10 k Hz, 2-phase mode 10 k Hz
Min. input pulse width: 1 phase 50 µs • 2 phases 50 µs
2 potentiometers
Total 8 points (X0 to X7)
10 ms to 30 s interval
Communication speed: 300/600/1,200/2,400/4,800/9,600/19,200 bps
Communication distance per port: 15 m/49.213 ft.
Connector: D-SUB 9 pins connector
Clock/calendar function available
64 I/O points (32 inputs and 32 outputs) or 32 I/O points (16 inputs and 16 outputs)
2 points (Y6 and Y7)
Pulse output frequency range:
360 to 5,000 Hz/180 to 5,000 Hz/90 to 5,000 Hz/45 to 5,000 Hz
2.5 ms × set value (160 ms or less)
1 to 128 ms
Watchdog timer, battery detection, program check, and others
Approx. 27,000 h (C types: C20RC, C20TC and C32TC)
Approx. 53,000 h (except C types: C20R, C20T and C32T)
2-1. Specifications of Control Board and Expansion Board
Description
19