7-3. D/A Converter Board
3. Parts Terminology
3 Expansion connector
5 Analog range selectors
JP3
B
A
JP2
2 Output terminal
1 Expansion power supply connector:
2 Output terminal (12-pin):
3 Expansion connector:
4 Board number selector:
(See following page.)
5 Analog range selectors:
(See following page.)
140
4 Board number selector
JP4
B
A
JP1
B
B
A
A
Supplies power (24 V DC) to the D/A converter board using the
expansion power supply cable.
Connect the external output devices (e.g., solenoid) for channels 0
and 1.
Connects the control board with the internal circuit.
Sets the special data register for storing analog output data by
selecting the board number.
The analog output ranges are selectable with jumper pins on the
board.
1 Expansion power
supply connector